Automatic Machine for Packaging Therapeutic Cannabis Sachets mod. MONIKA
The machine is made up of two units: the upper unit which conveys the product and weighs it and the lower unit which packs the product into sachets.
The upper unit is made up of four vibrating cups . Each cup can be adjusted from the touch screen panel for vibration intensity and quantity of product to be weighed. Each cup discharges the product into the load cell which will add each weighing to reach the final weight set by the customer. If the material to be weighed is not uniform, the machine can also be set up with a safety system for rejecting it if the weighing is not correct.
The weighed product passes from the load cell to the lower unit via a chute in stainless steel. The machine then packages the sachets in heat-sealable material starting from a single reel which is dragged by a motor through a sensor. The sealing can be on three sides or on the back side of the sachet. The length of the sachet and the sealing temperature can be managed via a touch screen panel.
Although the machine was created specifically for the packaging of therapeutic cannabis, it can package any type of product: herbs, powders, tablets, capsules. If there are particular needs, the two units also work in manual mode.
Technical details:
Envelope cut type:
- Envelope sealed on 3 sides
- Envelope sealed on the back
- Model
- Monika
- Sachet size
- max 140 mm (width)x 160 mm (length) min 40 mm (width) x 50 mm (length)
- >Weighing range
- From 0.150 to 50 grams (in this setup)
- >Precision
- 0.10 mg
- Speed
- 10-30 bags/min
- Voltage
- 220V 50Hz 2.2Kw
- Material for sachet packaging
- Aluminium, PET, PE, herbal tea filter, mylar bag, etc. as long as it is heat sealable
- >Maximum film roll width
- 320 mm
- Weight (Kg)
- 220 Kg
- Machine Dimensions
- 680 mm x 1050 mm x 2200 mm
- Optional
- Product waste, PLC and additional touch screen for downloading production data, envelope pre-cutting.
